Sanyo PLC-XF20 Owner's Manual

Also see for XF20 - PLC XGA LCD Projector: Specifications Instruction manual Service manual

24ADJUSTING THE IMAGEThe message disappears after 4 seconds.The message disappears after 4 seconds.ZoomZOOM ADJUSTMENTFOCUS ADJUSTMENT1 Press the ZOOM / button(s) on the Side Control or on theRemote Control Unit. The message “Zoom” is displayed.2 Press the ZOOM button to make the image larger, and pressthe ZOOM button to make the image smaller.1 Press the FOCUS / button(s) on the Side Control or on theRemote Control Unit. The message “Focus” is displayed.2 Adjust the focus of the image by pressing the FOCUS /button(s).The message disappears after 4 seconds.Lens shiftLENS SHIFT ADJUSTMENT1 Press the LENS SHIFT button on the Side Control or on theRemote Control Unit. The message “Lens shift” is displayed.2 Press the POINT UP button to move the image up, press thePOINT DOWN button to move the image down, press the POINTLEFT to move the image left and press the POINT RIGHT tomove the image right.KEYSTONE ADJUSTMENT1 Press the KEYSTONE / button on the Remote Control Unitor select the Keystone on the SCREEN menu. (Refer to page34, 38.) The message “Keystone” is displayed.2 Correct the Keystone distortion by pressing the KEYSTONE/ button or the POINT UP/DOWN button(s). Press theKEYSTONE button or the POINT UP button to reduce theupper part or the image, and press the KEYSTONE button orthe POINT DOWN button to reduce the lower part. The message disappears after 4 seconds.Reduce the upper width with the KEY STONE button or the POINT UP button.Reduce the lower width with the KEY STONE button or the POINT DOWN button.If the picture has keystone distortion, correct image with KEYSTONE adjustment.BASIC OPERATIONFocusKeystone