7PREPARATIONNAME OF EACH PART OF THE PROJECTORBOTTOM OF THE CABINETBACK OF THE CABINETHOT AIR EXHAUSTED !Air blown from the exhaust vent is hot.When using or installing the projector, thefollowing precautions should be taken. Do not put a flammable object near this vent. Keep the rear grills at least 3’ (1m) awayfrom any object, especially heat-sensitiveobject. Do not touch this area, especially screwsand metallic parts. This area will becomehot while the projector is used.This projector detects the internaltemperature and automatically controls theoperating power of the Cooling Fans.FRONT OF THE CABINETLAMP COVERADJUSTABLE FEETThis projector is equipped with coolingfans for protection from overheating.Pay attention to the following to ensureproper ventilation and avoid a possiblerisk of fire and malfunction. Do not cover the vent slots. Keep bottom clear of any objects.Obstructions may block cooling air.AIR INTAKE VENTSPROJECTION LENSSPEAKERSINFRAREDREMOTE RECEIVERLENS COVERPOWER CORDCONNECTOREXHAUST VENTMAIN ON / OFFSWITCHINFRAREDREMOTE RECEIVERCARRYING HANDLELEVEL AND TILT ADJUST HANDLEAIR FILTERADJUSTABLE FEET