36VIDEO MODESELECTING COLOR SYSTEMPress the MENU button and the ON-SCREEN MENU willappear. Press the POINT LEFT/RIGHT buttons to selectSYSTEM and press the SELECT button. Another dialog boxVIDEO SYSTEM Menu will appear.Press the POINT DOWN button and a red-arrow icon willappear. Move the arrow to "Auto", and then press the SELECTbutton.12The projector automatically detects the incoming Video system, andadjusts itself to optimize its performance.When the Video System is PAL-M or PAL-N, select the systemmanually.If the projector cannot reproduce the proper video image, it isnecessary to select a specific broadcast signal format among PAL,SECAM, NTSC, NTSC 4.43, PAL-M, and PAL-N.Move the arrow tothe Mode and pressthe SELECT button.This box indicates thesystem being selected.Move the arrow tothe Mode and pressthe SELECT button.This box indicates thesystem being selected.AutoPAL / SECAM / NTSC / NTSC4.43 / PAL-M / PAL-NThe projector automatically detects the incoming Video signal, andadjusts itself to optimize its performance.If the projector cannot reproduce the proper video image, it isnecessary to select a specific component video signal format among480i, 575i, 480p, 575p, 720p, 1035i, 1080i-50 and 1080i-60.AutoCOMPONENT VIDEO SIGNAL FORMATWHEN SELECT THE INPUT 3 (AV TERMINAL )WHEN SELECT THE INPUT 2 (5 BNC TERMINAL )