Sanyo PLC-XF47 Owner's Manual

Also see for PLC-XF47: Brochure Specifications Owner's manual Service manual

Contents

11Input / Output Terminals and Jackse R/C jACKWhen using the wired remote control, connect thewired remote control to this jack with a remotecontrol cable (not supplied).r USB CONNECTOR (Series B)Use this connector when controlling a computerwith the remote control of the projector. Connectthe USB terminal of your computer to thisconnector with the USB cable (not supplied).i S-VIDEO INPUT jACKConnect the S-VIDEO output signal from videoequipment to this jack (p.21).q SERIAL PORT IN TERMINALIf you control a projector by computer, you mustconnect a cable (not supplied) from your computerto this terminal.w SERIAL PORT OUT TERMINALThis terminal outputs signal from SERIAL PORT IN.More than two projectors can be controlled withone computer by connecting SERIAL PORT IN. ofanother projector to this terminal.u 5 BNC INPUT jACKSConnect the component or composite videooutput signal from video equipment to VIDEO/Y,Pb/Cb, and Pr/Cr jacks or connect the computeroutput signal (5 BNC Type [Green, Blue, Red,Horiz. Sync, and Vert. Sync.]) to G, B, R, H/V, and Vjacks (pp.20–21).[ RESET buttonA built-in micro processor which controls this unit mayoccasionally malfunction and need to be reset. This can be doneby pressing the RESET button with a pen, which will shut downand restart the unit. Do not use the RESET function excessively.ANALOGG B R H/HV VDIGITAL (DVI-D)INPUT 1R/C JACK USBRESETINPUT 2INPUT 3INPUT 4SERIAL PORT INSERIAL PORT OUTLVIDEO/Y Pb/Cb Pr/CrS-VIDEO▼q we r ✽t yiut DVI INPUT TERMINALConnect computer output (Digital/DVI-D type) tothis terminal. (Refer to p.20)HD (HDCP Compatible) signal can be alsoconnected. (Refer to p.21)y D-sub 15-PIN INPUT TERMINALConnect computer output (Analog D-sub 15-pintype) to this terminal.(Refer to p.20)Part Names and FunctionsDownloaded From projector-manual.com Sanyo Manuals