Sanyo PLC-XF47 Owner's Manual

Also see for PLC-XF47: Brochure Specifications Owner's manual Service manual

Contents

44Press the MENU button to display the On-Screen Menu.Use the Point 7 8 buttons to move the red frame pointerto the Image Adjust Menu icon.12 Use the Point ed buttons to move the red frame pointerto the desired item and then press the SELECT buttonto display the adjustment dialog box. Use the Point 7 8buttons to adjust the setting value.IMAGE ADjUST MENUPress the Point 7 button to decrease contrast; press the Point8 button to increase the contrast (from 0 to 63).Press the Point 7 button to decrease the brightness; press thePoint 8 button to increase the brightness (from 0 to 63).ContrastBrightnessPress the Point 7 button to decrease the intensity of the color;press the Point 8 button to increase the intensity of the color(from 0 to 63).Press the Point 7 8 buttons to adjust the tint value to obtainproper color balance (from 0 to 63).Color ✽Tint ✽Color ManagementThe Color Management function can be used to adjust theLEVEL, PHASE, and GAMMA of the selected display colors(except for black, white, and gray) on the screen and replacethese colors with other colors if required.You can store up to eight (8) color management data.1 Use the Point ed buttons to move the red frame pointerto Color Management, and then press the SELECTbutton. The projected image freezes, and the COLORMANAGEMENT POINTER appears.Use the Point ed7 8 buttons to move the pointer to thespot where you want to adjust the color and then pressthe SELECT button. The COLOR SELECTION windowappears, and the color in the center of the pointer isselected and you can adjust the color.2Use the Point ed7 8 buttons to adjust the LEVEL andPHASE of the color, and then press the SELECT buttonto confirm the setting. Then use the Point ed buttons toadjust the GAMMA for the color and press the SELECTbutton to accept the setting. After adjusting, press theSELECT button to go to the COLOR MANAGEMENT LIST.3COLOR MANAGEMENTPOINTERPOINTER MODEImage AdjustmentMove the red frame pointer to the desireditem and then press SELECT button.Image Adjust Menu iconUse the Point 7 8 buttons to adjust thesetting value.COLOR SELECTION MODEGo to the COLOR MANAGEMENT LIST.LISTPicture Image✔Note:✽ Displayed only in Video Input.• Tint cannot be selected when the video systemis PAL, SECAM, PAL-M, or PAL-N (p.40).Downloaded From projector-manual.com Sanyo Manuals