Sanyo PLC-XF47 Owner's Manual

Also see for PLC-XF47: Brochure Specifications Owner's manual Service manual

Contents

4Press the ON/STAND-BY button on the side controlor on the remote control, and “Power off?” appearson the screen.Press the ON/STAND-BY button on the side controlor on the remote control again to turn off theprojector. The LAMP indicator lights bright and theREADY indicator turns off. After the projector isturned off, the cooling fans operate for 90 seconds.You cannot turn on the projector during this coolingdown period.12TO MAINTAIN THE LIFE OF THE LAMP, ONCE YOUTURN THE PROJECTOR ON, WAIT AT LEAST FIVEMINUTES BEFORE TURNING IT OFF.DO NOT UNPLUG THE AC POWER CORD WHILECOOLING FANS ARE RUNNING OR BEFORE THEREADY INDICATOR LIGHTS GREEN AGAIN.OTHERWISE IT WILL RESULT IN SHORTENING OFTHE LAMP LIFE.3 When the projector has cooled down enough, theREADY indicator lights green and then you can turnon the projector. To unplug the AC power cord, waituntil the projector is completely cooled down.“Power off?” disappears after 4 seconds.✔Note:• When the On start function is set to “On,” the projector will beturned on automatically by connecting the AC power cord to anAC outlet (p.51).• The running speed of cooling fans is changed according to thetemperature inside the projector.• Do not put the projector in a case before the projector is cooledenough.• If the WARNING TEMP. indicator blinks red, see “WarningIndicators” on page 69.• The projector cannot be turned on during the cooling periodwith the READY indicator turned off. You can turn it on againafter the READY indicator becomes green again.Turning Off the ProjectorDO NOT OPERATE THE PROJECTOR CONTINUOUSLYWITHOUT REST. CONTINUOUS USE MAY RESULTIN SHORTENING THE LAMP LIFE. TURN OFF THEPROJECTOR AND LET STAND FOR ABOUT AN HOURIN EVERY 24 HOURS.Basic OperationDownloaded From projector-manual.com Sanyo Manuals