Sanyo PLC-XF47 Owner's Manual

Also see for PLC-XF47: Brochure Specifications Owner's manual Service manual

Contents

NOTE ON THE POWER CORDAC power cord must meet the requirements of the country where you use the projector.Confirm the AC plug type with the chart below and proper AC power cord must be used.If the supplied AC power cord does not match your AC outlet, contact your sales dealer.Projector side AC Outlet sideTo POWER CORDCONNECTOR on yourprojector.GroundTo the AC Outlet.(40 V AC)For Continental EuropeFor the U S A and Canada For the U KTo the AC Outlet.(00–40 V AC)To the AC Outlet.(00–40 V AC)This projector uses nominal input voltages of 200–240 V AC. Itis designed to work with single-phase power systems having agrounded neutral conductor. To reduce the risk of electrical shock,do not plug into any other type of power system.If you are not sure of the type of power being supplied, consultyour authorized dealer or service station.Connect the projector with all peripheral equipment before turningon the projector.CAUTIONThe AC outlet must be near this equipment and must be easilyaccessible.Connecting the AC Power CordConnect the AC power cord (supplied) to theprojector.Installation✔Note:• Unplug the AC power cord when the projector is not in use.When the projector is connected to an outlet with AC powercord, it is in stand-by mode and consumes a little electricpower.Downloaded From projector-manual.com Sanyo Manuals