Sanyo PLC-XK2200 Owner's Manual

Also see for PLC-XK2200: Owner's manual User manual Owner's manual Manual Manual

Contents

18The preparation display will disappear after 30 seconds.(See page 52 for Lamp control status.)7XUQLQJ2QWKH3URMHFWRUConnect the projector’s AC power cord into an ACoutlet. The POWER indicator lights red. Open theOpen theOpen thelens cap.Press the ON/STAND-BY button on the top controlor on the remote control. The POWER indicatorlights green and the cooling fans start to operate.The preparation display appears on the screen andthe countdown starts.231 Complete peripheral connections (with a computer,VCR, etc.) before turning on the projector.6HOHFWHG,QSXW6RXUFHDQG/DPSControl3NoteThe Filter warning and Lamp replacementicons may appear on the screen dependingon the usage state of the projector.Basic Operation164 After the countdown, the input source that wasselected the last time and the lamp control statusicon (see page 52) appear on the screen.31RWH• When the Logo select function is set to 2II,the logo will not be shown on the screen(p.46).• When &RXQWGRZQ RII or 2II is selected inthe Display function, the preparation displaywill not be shown on the screen (p.46).• When the Input Search function is set toOn 2, the input signal will be searchedautomatically (p.45).• When 2II is selected in the Display function,the Video/PC selection window and the inputsignal guidance window are not shown onthe screen. (p.46)5 If there is no signal input when start on the projector,or the current signal is missed while operating theprojector, the Video/PC selection window will bedisplayed on the screen, please move the pointer toLQSXWVRXUFHGHVLUHGE\SUHVVLQJWKH3RLQWŸźbuttons and press the SELECT button. And thenfollow the input signal guidance window to correctthe signal and connection.If the projector is locked with a PIN code, PIN codeinput dialog box will appear. Enter the PIN code asinstructed on the next page.9LGHR3&VHOHFWLRQZLQGRZ,QSXWVLJQDOJXLGDQFHZLQGRZ9LGHR3&VHOHFWLRQZLQGRZ,QSXWVLJQDOJXLGDQFHZLQGRZProject VideoProject ComputerCancelProject VideoProject VideoProject ComputerCancelProject ComputerNo signalCurrent Input setting:VideoIs signal processed correctly?Is cable connected properly?No signalCurrent Input setting:RGBIs signal processed correctly?Is cable connected properly?VideoLamp control status