Sanyo PLC-XP17N Owner's Manual

Contents

Sanyo PLC-XP17N Owner's Manual Manual pdf 38 page image

38AUTO IMAGE SETTINGDISPLAYMAIN MENU DISPLAYCOMPUTER MODEAUTO IMAGE FUNCTIONThe Auto image function is provided to automatically adjust Fine sync., Total dots and Screen position for mostcomputers.NOTE: This AUTO IMAGE function cannot be operated when "RGB", "HDTV1035i" or "HDTV1080i" is selected on theCOMPUTER SYSTEM SELECT menu. (See pages 36 ~ 37).1. Press the MENU BUTTON and the MAIN MENU DISPLAY dialog box will appear.2. Press the POINT LEFT/RIGHT BUTTON(s) to select AUTO IMAGE and press the SELECT BUTTON. Another dialogbox AUTO IMAGE SETTING DISPLAY will appear.3. Press the POINT DOWN BUTTON and a red arrow will appear.4. Move the arrow to an item(s) you want to adjust by pressing the POINT UP/DOWN BUTTON(s).5. Change the setting "On" , press the SELECT BUTTON.6. Move the arrow by pressing the POINT UP/DOWN BUTTON(s) to select "Go!" and then press the SELECT BUTTON.The auto image function is started now. It will take about 10 seconds.7. To store the settings, move the arrow to Stored and then press the SELECT BUTTON. When you have stored thesettings, "OK?" is displayed for confirmation.8. Move the arrow to "Yes" and then press the SELECT BUTTON. The stored settings are memorized even if the MAINON/OFF is switched off.9. To quit the MENU, point to Quit and then press the SELECT BUTTON.10.This setting is temporarily effective until you turn off the projector or change the input signal.NOTE: The fine sync., total dots and screen position of some computers may not be fully adjusted with the "Auto ImageFunction." In that case, use the "Picture Image" and/or "Picture Position" adjustments (see pages 39 ~ 40) tomake fine-adjust them after the "Auto Image Function" is executed.