Sanyo PLC-XP17N Owner's Manual

Contents

Sanyo PLC-XP17N Owner's Manual Manual pdf 41 page image

41MAIN MENU DISPLAYCOMPUTER MODEPC ADJUSTMENTThis projector can automatically detect display signals from most personal computers currently distributed. However,some computers employ a special signal format which is different from the standard one and the projector cannot detectit. If this happens, the projector cannot reproduce a proper image. And a flickering picture, a non-synchronized picture, anon-centered picture or a skewed picture may be projected instead.For those non-standard formats, this projector is provided with PC ADJUST, enabling you to precisely adjust severalparameters to match with the input signal format. The projector has eight independent memory areas where you canstore the parameter you have set. This enables you to recall the setting for a specific computer when you need it.NOTE: This PC ADJUSTMENT function cannot be operated when "RGB", "HDTV1035i" or "HDTV1080i" is selected onthe COMPUTER SYSTEM SELECT menu. (See pages 36 ~ 37).1. Press the MENU BUTTON and the MAIN MENU DISPLAY dialog box will appear.2. Press the POINT LEFT/RIGHT BUTTON(s) to select PC ADJUST and press the SELECT BUTTON. Another dialogbox "Where to reserve" will appear.3. In this dialog box, you will select one of the memory areas from among "Mode 1" to "Mode 8". If parameters havebeen previously set and stored in the memory, the status "Stored" will appear on the corresponding row. If not, "Free"will appear.4. Press the POINT DOWN BUTTON and a red arrow will appear.5. Move the arrow to one of the "Modes" (Free position) where you want to store the parameters by pressing the POINTUP/DOWN BUTTON(s). Press the SELECT BUTTON to select it.NOTE : If "Stored" appears in all Modes, no new PC parameter data can be stored. In this case, clear the PC parameterdata using Mode free Function. (See page 44).Continued to the next page.