46OTHER FUNCTION SETTINGThis projector has other functions settings: Blue back, Display, Ceiling, Rear, Split wipe, Power management, Remotecontrol and Lamp age.See the next page menus figure and settings.T BT BL RL RBLUE BACK (On or Off)SPLIT WIPE (On or Off)REAR (On or Off)CEILING (On or Off)DISPLAY (On or Off)POWER MANAGEMENT (On or Off)When this function is in the "On" position, the projector will project a blue image without video noise on the screen whenthe video source is unplugged or turned off.When this function is in the "On" position, on-screen displays always appears when adjustments are made. Althoughthese on-screen displays are very helpful, these may spoil the view if adjustments are made during presentations. Toavoid this, you can keep back certain displays by switching this function "Off". The followings are the displays that youcan hide. Wait Display Mode Display Volume Display Mute Display Zoom/Focus Display True Display D.Zoom Display Keystone Display No show Display Normal DisplayWhen this function is in the "On" position, the top/bottom and the left/rightpicture reverse capability lets you project from a ceiling-mounted projector.Turn SPLIT WIPE function On in the SETTING menu. The picture will change into the next one by sliding black imageside ways when the input source is changed.Change the input source by MODE button. The picture is replaced by black image from side ways to the center, and thenext one appears from the center to side ways like drawing the black curtains.Power management will be turn the projector Lamp off when the input signal is interrupted (Picture is not displayed) over5 minutes. This aims at saving power and Lamp life. The Lamp is automatically turned on when the signal is input.To activate this function, turn the "Power management" in the SETTING menu "On".When this function is in the "On" position, the left/right picture reverse capabilitylets you project onto a rear projection screen.