Sanyo PLC-XP17N Owner's Manual

Contents

Sanyo PLC-XP17N Owner's Manual Manual pdf 45 page image

45COMPUTER MODETrueThis projector has a picture screen resize function, which enables you to display the image in desirable size.1. Press MENU BUTTON and MAIN MENU DISPLAY dialog box will appear.2. Press POINT LEFT/RIGHT BUTTON(s) to select SCREEN and press the SELECT BUTTON. Another dialog boxSCREEN ADJUST DISPLAY will appear.3. Press POINT DOWN BUTTON and a red arrow will appear.4. Move the arrow to the function that you want to adjust.PICTURE SCREEN ADJUSTMENT1. To adjust the image size or pan the image, move the arrow to Digital zoom by pressing POINTUP/DOWN BUTTON(s) and then press SELECT BUTTON. MAIN MENU DISPLAY andSCREEN ADJUST DISPLAY will disappeared and "D. Zoom" and the magnifying-glass icon isdisplayed. This projector cannot display in the resolution more than 1280 x 1024. If your computer's screen resolution is higher than1280 x 1024, reset the resolution to the lower. The image data of VGA (640 x 480), SVGA (800 x 600), or SXGA (1280 x 1024) is modified to fit the screen size in theinitial mode. The maximum size in expand mode is 7 times as large as the original screen size. The minimum size in compress mode is the screen size (1024 x 768) in XGA or SXGA mode, 800 x 600 in SVGA modeor 640 x 480 in VGA mode. Panning function can work only when the image is expanded. The normal "Panning Operation" may not function properly if the computer system prepared with the "PC Adjust" is used.D. Zoom1. When the image is distorted vertically, move the arrow to Keystone by pressing POINT UP/DOWN BUTTON(s) and thenpress SELECT BUTTON. The "Keystone" is displayed to indicate Keystone mode.2. Press the POINT UP BUTTON to reduce the upper part of the image, and the POINT DOWN BUTTON to reduce thelower part. (See "KEYSTONE FUNCTION" section on page 28).3. Press the NORMAL BUTTON in keystone mode, the image changed to original image (not correct keystone distortion).Digital zoomKeystoneSCREEN ADJUSTDISPLAYMAIN MENU DISPLAYTrue1. To turn the image size to true size (1280 x 1024 in SXGA, 1024 x 768 in XGA, 800 x 600 inSVGA and 640 x 480 in VGA), move the arrow to True by pressing POINT UP/DOWNBUTTON(s) and then press SELECT BUTTON. The image size is turned to the true size. The"True" is displayed to indicate True mode (except for XGA input).2. When the input image data resolution is more than the screen size (1024 x 768), the image canbe panned by pressing the POINT UP/DOWN/LEFT/RIGHT (POINTING PAD) BUTTON(s).2. Move the magnifying-glass icon by pressing the POINT UP/DOWN/LEFT/RIGHT (POINTING PAD) BUTTON(s).3. To expand the image, press the D.ZOOM () button or the SELECT button on the remote control unit. The image ismagnified by degrees (Expand function).4. To compress the image size, press the D.ZOOM () button or the FRONT CLICK button on the remote control unit. Thesize of image is reduced by degrees (Compress function).5. To pan the image, press POINT UP/DOWN/LEFT/RIGHT (POINTING PAD) BUTTON(s) and move the magnifying-glassicon.NOTE:1. To cancel the True and Digital Zoom mode, press other buttons (Except NORMAL BUTTON).2. Press the NORMAL BUTTON in True and Digital Zoom mode, the image size changed to the screen size (1024 x 768).3. The "True" and "Digital zoom" cannot be operated when "RGB", "HDTV1035i" or "HDTV1080i" is selected on theCOMPUTER SYSTEM SELECT menu. (See pages 36 ~ 37).