Sanyo PLC-XU30 Owner's Manual

26COMPUTER INPUTNOTE : Fine sync, Total dots, Display area (H/V) and Full screencannot be adjusted when “1035i (HDTV)” or “1080i (HDTV)”is selected on PC SYSTEM Menu (P22).Selects area displayed with this projector. Select the resolution atDisplay area dialog box.Display areaAdjustment of horizontal area displayed with this projector. PressPOINT LEFT/RIGHT button(s) to decrease/increase value and thenpress SELECT button.Display area HAdjustment of vertical area displayed with this projector. PressPOINT LEFT/RIGHT button(s) to decrease/increase value and thenpress SELECT button.Display area VPress POINT LEFT/RIGHT button(s) to switch Full screen function to“On” or “Off.” Set “On” to resize the image with 4 x 3 aspect ratio tofit the screen.Full screenResetStoreCloses PC ADJUST MENU.QuitOther icons operates as follows.3 To store adjustment parameters, move a red frame pointer toStore icon and then press SELECT button. Move a red arrowpointer to any of Mode 1 to 5 that you want to store to and thenpress SELECT button.Reset all adjust parameters on adjustment dialog box to previousfigure.Mode freeVacant Mode Shows values of “Total dots,”“Horizontal,” “Vertical,” “Displayarea H,” and “Display area V.”Store iconMode free iconClose this dialog box.To store adjustment data.To clear adjustment data.To clear adjustment parameters previously set, move a redframe pointer to Mode free icon and then SELECT button. Movea red arrow pointer to the Mode that you want to clear and thenpress SELECT button.Display areaPress POINT LEFT/RIGHT button(s) toadjust value and thenpress SELECT button.Press SELECT button atDisplay area icon and Displayarea dialog box appears.This Mode has parameters being stored.