Sanyo PLC-XU30 Owner's Manual

7PREPARATIONNAME OF EACH PART OF PROJECTORBOTTOMBACKHOT AIR EXHAUSTED !Air blown from Exhaust Vents is hot.When using or installing projector,following precautions should be taken. Do not put any flammable object nearthese vents. Keep front grills at least 3’(1m) awayfrom any object, especially heat-sensitive object. Do not touch this area, especially screwand metallic part. This area will becomehot while a projector is used.This projector detects internaltemperature and automatically controlsoperating power of Cooling Fans.FRONTThis projector is equipped with CoolingFans for protection from overheating.Pay attention to the following to ensureproper ventilation and avoid a possiblerisk of fire and malfunction. Do not cover vent slots. Keep back and bottom clear of anyobject. Obstructions may blockcooling air.PROJECTION LENS LENS COVEREXHAUST VENTSINFRAREDREMOTE RECEIVERCARRY HANDLESPEAKERINFRAREDREMOTE RECEIVERPOWER CORD CONNECTORTERMINALSAND CONNECTORSTOP CONTROLSAND INDICATORSLAMP COVERADJUSTABLE FEETANDFEET LOCK LATCHESAIR FILTERAIR INTAKE VENTS(Back and Bottom)