29COMPUTER INPUTPICTURE SCREEN ADJUSTMENTThis projector has a picture screen resize function, which enables you to display the desirable image size.Press MENU button and ON-SCREEN MENU will appear. PressPOINT LEFT/RIGHT button(s) to move a red frame pointer toSCREEN Menu icon.When Digital zoom + is selected, ON-SCREEN MENU disappearsand the message “D. Zoom +” is displayed. Press SELECT button toexpand image size. And press POINT UP/DOWN/LEFT/RIGHTbutton(s) to pan the image. Panning function can work only whenthe image is larger than screen size.A projected image can be also expanded by pressing D.ZOOM button on Remote Control Unit.1To cancel Digital Zoom +/– mode, press any button except D.ZOOM/, SELECT, POINT and LASER buttons.Move the red frame to the function andpress SELECT button.Press POINT DOWN button and move a red frame pointer to thefunction that you want to select and then press SELECT button.2WideDigital zoom +NOTE This SCREEN Menu cannot be operated when“1035i (HDTV)” or “1080i (HDTV)” is selected onPC SYSTEM Menu (P22). Wide cannot be selected when “720p (HDTV)” isselected on PC SYSTEM Menu (P22). True and Digital zoom +/– cannot be selectedwhen “RGB” is selected on PC SYSTEM Menu(P22). This projector cannot display any resolution higherthan 1280 X 1024. If your computer’s screenresolution is higher than 1280 X 1024, reset theresolution to the lower before connecting projector. The image data in other than XGA (1024 x 768) ismodified to fit the screen size in initial mode. Panning function may not operate properly if thecomputer system prepared on PC ADJUST Menuis used.Provides image to fit screen size.NormalTrueSCREEN MENUSCREEN Menu iconWhen Digital zoom – is selected, ON-SCREEN MENU disappearsand the message “D. Zoom –” is displayed. Press SELECT button tocompress image size.A projected image can be also compressed by pressing D.ZOOM button on Remote Control Unit.Digital Zoom –Provides image in its original size. When the original image size islarger than screen size (1024 x 768), this projector enters “Digitalzoom +” mode automatically.Provides image to fit wide video aspect ratio (16 : 9) by expandingimage width uniformly. This function can be used for providing asqueezed video signal at 16 : 9.