Sanyo PLC-XU30 Owner's Manual

31VIDEO INPUTAV SYSTEM MENU (VIDEO OR S-VIDEO)AV SYSTEM MENU (COMPONENT VIDEO)SELECTING VIDEO SYSTEMPress MENU button and ON-SCREEN MENU will appear. PressPOINT LEFT/RIGHT buttons to move a red frame pointer to AVSYSTEM Menu icon.Press POINT DOWN button to move a red arrow pointer to thesystem that you want to select and then press SELECT button.12If projector cannot reproduce proper video image, it is necessary toselect a specific broadcast signal format among PAL, SECAM, NTSC,NTSC 4.43, PAL-M, and PAL-N. Move the pointer to thesystem and pressSELECT button.PAL / SECAM / NTSC / NTSC4.43 / PAL-M / PAL-NProjector automatically detects incoming Video signal, and adjustsitself to optimize its performance.If projector cannot reproduce proper video image, it is necessary toselect a specific component video signal format among 480i, 575i,480p, 575p, 720p, 1035i and 1080i.AutoCOMPONENT VIDEO SIGNAL FORMATVIDEO JACK OR S-VIDEO JACKY, Pb/Cb, Pr/Cr JACKSProjector automatically detects incoming Video system, and adjustsitself to optimize its performance.When Video System is PAL-M or PAL-N, select system manually.AutoAV SYSTEM Menu iconThis box indicates the systembeing selected.Move the pointer to thesystem and pressSELECT button.AV SYSTEM Menu iconThis box indicates the systembeing selected.