TEC MA-1350-1 SERIES Owner's Manual

Also see for TEC MA-1350-1 SERIES: Programming manual

Contents

TEC MA-1350-1 SERIES Owner's Manual Manual pdf 11 page image

- 4 -EO1-11126MA-1350-1 SERIES5. Control Lock and Control KeysControl KeysThere are four types of Control keys: the REG key, the MGR key, the MA key, and the S key.REG Key: The REG key is used by the cashier or clerk who operates ordinary transactionentries. This key can access the positions of OFF and REG of the Control Lock.MGR key: The MGR key is used by the store manager. This key can access the positionsof OFF, REG, X, and MGR.MA Key: The MA key is used by the owner who will daily supervise the collection ofmoney and printout of transactions recorded by the register. This key is alsoused when programming the register. This key can access the positions of SET,OFF, REG, X, MGR, - and Z.S Key: The S key is used by the service person from your TOSHIBA TECrepresentative to access any position. To prevent programmed data and salesdata from being changed or cleared by mistake, do not use this key withoutinstructions from your TOSHIBA TEC representative.Control LockThe Control Lock has seven effective positions for different modes of operation, which are accessed by theappropriate Control Keys.(position) (function)SET ............... The register allows programming and training operations.OFF ............... Nothing appears on the display in this position. However,the power is being supplied to the register.REG .............. Transaction entries are carried out in this mode. Displaysthe current time while no entries are under way.X ................. The sale totals in memory can be read (X reports) andthe programmed data can be verified in this position.MGR .............. This position allows to enter operations requiring Man-ager Intervention as well as all ordinary transaction en-tries to be carried out in the “REG” mode.- .................. This is the “Negative Mode” position, which makes en-tered data processed reversely to the REG or MGRmode. It is used to cancel or adjust sales data alreadyfinalized.Z ................. All the resettable totals and their respective counters inmemory will be read and reset in this position (Z reports)The keys may be inserted or pulled out at the “OFF” or “REG” position.REGMGRMASMA MGRREGOFFREGXSETMGR-äääZäää