TEC MA-1350-1 SERIES Owner's Manual

Also see for TEC MA-1350-1 SERIES: Programming manual

Contents

TEC MA-1350-1 SERIES Owner's Manual Manual pdf 25 page image

- 18 -EO1-11126MA-1350-1 SERIESSign ON Receipt Format Sign OFF Receipt FormatTEC STORE1343 PEACH DRIVEPHONE: 87-6437Open 8:00am to 7:00pmClosed: every Wednesday11-28-1997 #112300∗ SIGN ON ∗JONES 0117 08:46TMName of acashier whohas just signedON is printed ifthe name hasbeen pro-grammed. Ifnot, a cashiersymbol suchas “3CL” isprinted here.TEC STORE1343 PEACH DRIVEPHONE: 87-6437Open 8:00am to 7:00pmClosed: every Wednesday11-28-1997 #112300∗ SIGN OFF ∗JONES 0118 08:46TM1 432NOTES: 1. The two-digit Secret Code portion, once entered for a cashier’s Sign ON, is set in the memoryof the register. The Secret Code of the same cashier is checked every time his/her Sign ONis operated until the Daily Cashier Reset Report is taken at the end of the day. Then theSecret Code is reset and a new Secret Code entry will be allowed. When the Secret Code iswithin the range of 01 to 09, it will be omissible to enter the preceding zero.2. The multi-drawer feature can be adopted on this cashier-identifying method. In this case,Drawer 1 is assigned to cashiers 1 and 2, and Drawer 2 to cashiers 3 to 8.2) Cashier Key Method (Push LED Key)Each Cashier key (1 to 4) is assigned to each cash-ier. Push the assigned cashier key, and the built-inlight becomes lit, indicating that the key is ON toidentify the cashier. The ON status of the key will beheld until another cashier key is pushed.Sales entries will be possible only when one of thesekey is in the ON status (in “REG”, “MGR”, or “ - ”mode).The Key’s ON status will not be cleared even when the Mode Lock is turned to other positions.NOTES: 1. No receipts are issued on turning ON or OFF a Cashier Key. However, the cashier code (1 to4) or cashier name is printed near the bottom of every receipt to be issued.2. The multi-drawer feature can be adopted on this cashier-identifying method. In this case,Drawer 1 is assigned to cashiers 1 and 2, and Drawer 2 to cashiers 3 and 4.3) Cashier Key Method (Barrel Lock)This method is applied when two barrel locks are installed as cashierlocks. A maximum of 4 cashiers can be identified in this method.Each key (1 to 4) is assigned to each cashier. The register will not oper-ate in the REG, MGR, or - mode unless one of these keys is insertedand turned to the position (1 to 4) corresponding to the Cashier Key No.Each of the keys may be inserted and pulled out in the neutral positionmarked with a dot. When the operating cashier changes to another, thefirst Cashier Key must be pulled out before inserting another CashierKey.Cashier Keys 1 to 41 • 2 3 • 41