TEC MA-1350-1 SERIES Owner's Manual

Also see for TEC MA-1350-1 SERIES: Programming manual

Contents

TEC MA-1350-1 SERIES Owner's Manual Manual pdf 26 page image

- 19 -EO1-11126MA-1350-1 SERIESST99NOTES: 1. No receipts are issued on turning ON or OFF a Cashier Key. However, the Cashier Code (1to 4) is printed near the bottom of every receipt to be issued.2. The multi-drawer feature can be adopted on this cashier-identifying method. In this case,Drawer 1 is assigned to cashiers 1 and 2, and Drawer 2 to cashiers 3 and 4.4) Cashier Key Method ([CLK] Key)A maximum of 8 cashier keys ([CLK 1] to [CLK 8]) can be installed on the keyboard.Sale entries will be possible only when one of the [CLK] keys is depressed (in “REG”, “MGR”, or “ - ” mode).When the same [CLK] key is again depressed, the cashier will go in Cashier OFF status.NOTES: 1. No receipts are issued on turning ON or OFF a Cashier Key. However, the cashier code (1 to8) or cashier name is printed near the bottom of every receipt to be issued.2. When adopting this cashier-identifying method, it is recommended to select the programoption to display cashier code instead of department code. (Ask your TOSHIBA TEC repre-sentative.)3. The multi-drawer feature can be adopted on this cashier-identifying method. In this case,Drawer 1 is assigned to cashiers 1 and 2, and Drawer 2 to cashiers 3 to 8.Cashier ReportsBy adopting the Cashier Identifying option, Daily Cashier Read and Reset Reports (for individual cashiers)and Periodical Cashier Read and Reset Reports (for all the cashiers together in one report) are available. Forthe report taking operations and print format, see Chapter 3 on page 4 in Manager’s Guide.12. TrainingThis chapter describes a training provided for new employed cashiers. After entering the training mode, a cash-ier may operate the same transaction entries as those in the REG mode. The data in the training mode is notprocessed, therefore not affect any actual sales data in business.• Turn the Control Lock to the SET position using the MA key.• In the operation patterns, indicates an input through a numeric key, and indicates a depressionof a transaction key.Operation for Training Mode Start................................ A training start receipt is issued.