TEC MA-1350-1 SERIES Owner's Manual

Also see for TEC MA-1350-1 SERIES: Programming manual

Contents

TEC MA-1350-1 SERIES Owner's Manual Manual pdf 51 page image

- 44 -EO1-11126MA-1350-1 SERIES3. If the “SLIP” lamp flickers during registrations, it indicates that the last item just entered hasbeen programmed to require validation print. In this case, no other operations can follow untilthe validation print of the item is performed.4. The following options are selective in relation to validation print:1) Print Formata) Consecutive No. Print/Non-printb) Cashier No. Print/Non-print2) Number of times for validation print of the same item Single-validation (onlyonce allowed), or Multi-validation (any number of times allowed)3) Validation Print Content after each non-cash media tender4) Validation Counter on the Financial Report Print/Non-print5) Validation Compulsory status on the following keys:[AT/TL], [CHECK TEND], [chg], [MISC], [CPN], [FS TL TEND], [TRF],[VND CPN], [STR CPN], [RTN MDSE], [PO], [R/A], [ITEM CORR], [VOID],[DOLL DISC], [%-], Negative Departments and PLUs.For details, ask your TOSHIBA TEC representative.Validation Print-- Receipt Print --DP06 500.00CASH 500.00JONES 0224 13:57TM11-28-1997 1CL 0224 DP06 500.00Date Receipt Department Amount(Month-Day-Year) Consecutive No. No.Cashier No.→11-28-1997 1CL 0224 CASH 500.00Media Sale Total orTendered Amount→Remote Slip Printer (hardware option) OperationThe TEC Remote Slip Printer DRS-207 may be connected to the MA-1350-1 series ECR as an optional de-vice. The Remote Slip Printer will operate printing if a slip is properly inserted, regardless of the Mode Lockposition (except that no print will occur in the “SET” mode or during program verification in the “X” mode).1. The remote slip printer will automatically activate printing when the slip has properly been set to the printertable.2. The gap of the slip inlet is usually opened, and the slip may be inserted or withdrawn freely outside areceipt/journal print sequence.When a slip is properly set to the remote slip printer and the ECR is operated, the gap will be closed andprinting will be performed. When the sale is finalized and the receipt is issued, the gap of the DRS-207 willbe opened to allow the slip withdrawal. (The gap keeps closed during sale item entries.)3. The RELEASE key on the DRS-207 may be used to open the closed gap in order to withdraw the slip andskip unnecessary item printer is in a printing action.4. Printing on the remote slip will be performed alternately with printing on the receipt/journal of the ECR.