- 2 -EO1-11126MA-1350-1 SERIES3. Outline of Preparation Procedure Before Operating theECRThis chapter shows the outline of set-up procedure of the ECR before actually starting the ECR operation.54321OFFREGXSETMGR-ZOFFREGXSETMGR-ZRemove the cash register from the carton, referring to Chap-ter 2. Unpacking on page 1. And take out all the parts andaccessories.Remove the tapes and seals for holding parts or protectingthe register surfaces.Plug the power cord of the register into a wall outlet. Makesure that the outlet voltage matches that of the power re-quired for the register.Insert the REG key into the Control Lock.Turn the Control Lock to the REG position.(1) (2) (3) (5) (6) (7) (8)(4)67Install the paper roll(referring to Chapter 8. Installing theReceipt/Journal Roll on page 12). Also, install the RibbonCassette(referring to Chapter 9. Installing the Ribbon Cas-sette on page 15).Before starting actual transaction entries on the register, askyour manager if you need additional setting or the pro-grammed data needs to be changed. For programming, referto the following Chapters in Manager’s Guide:4. Changing the Programmed Data (page 17)5. Program Data Verification (page 41)
