TEC MA-1350-1 Series Programming Manual

Contents

TEC MA-1350-1 Series Programming Manual Manual pdf 13 page image

- 11 -EO3-11084MA-1350-1 SERIESAll Memory ClearIf the register becomes completely inoperative due to battery discharge or malfunction of the programmemory, the All Memory Clear operation must be carried out. When an All Memory Clear is operated, allthe memory contents that have been stored in the RAM will be cleared (i.e., the programmed data and thesales data). Along with the clearing process, the designated zero-amount format is set and “Initial Data” and“Initial Status” for respective programming items are automatically set.Warning: This clear operation deletes all programmed data and sales data stored in the register’smemory. (i.e., the register goes back to initial status.)Operating ProcedureCondition: Any time, outside or during any operation sequenceOperation:Use the S Key to turn theControl Lock to “BLIND”.Depress the following Numeric Key according to the display and print format for zero amount andthe nation where the register is used:NOTE: When an All Memory Clear is operated, the condition “after all sales data reset” is obtained, just as“Status Clear” or “Sales Memory Clear”. Therefore, no Reset Reports need to be taken for startingany programming operation.Numeric Key Zero-amountFormatVersion Code(Nation)0 . 0 0. 0 IT (Italy)US (The UnitedStates and Canada)1 9All Memory Clear SymbolReceipt Consecutive No. is resetto 0001.(Date and Time remain unreset.)Depress the key.An All Memory Clear receipt is issued.AT/TLZREGXSET-OFF(BLIND)MGR3 9TEC STORE1343 PEACH DRIVEPHONE: 87-6437Open 8:00am to 7:00pmClosed: every Wednesday11-28-1997 #0RAM-C0001 10:25TM