- 74 -EO3-11084MA-1350-1 SERIESPLU Preset-code Key SettingWhen there are any keys programmed as PLU Preset-code Keys on the ECR Keyboard, and/or when thePLU Keyboard PK-2 (hardware option) is connected to the ECR, a PLU code may be preset to each ofthose keys in this operation.Condition: Any time outside a saleProgramming Procedure:NOTES: 1. If the PLU Code entry is skipped and a [KEY] is simply depressed in the above sequence,the preprogrammed PLU Code of the KEY will be displayed.2. If “0” is entered as PLU Code in the above sequence, the KEY will be closed. Pressingthe closed KEY in sale entry will cause an error.PLU Preset-code Key Program Receipt Format:Key Operation: Control Lock: SETLocation Code (left side);refer to REMARKS 1 and2 on the next page.PLU Code assigned tothe key (right side)RequiredKeyTEC STORE1343 PEACH DRIVEPHONE: 87-6437Open 8:00am to 7:00pmClosed: every Wednesday11-28-1997 #0P27#116 05000089 12:11TM7 @/FOR0 0 AT/TL52PLU CodePLU CodeEnter through Numeric Keyson the ECR Keyboard(Enter 0 to close the key)Declaration of Program No. 27for PLU Preset-code Key Set-tingRepeat for other keys.7 @/FOR2 KEY AT/TL
