TEC MA-1350-1 Series Programming Manual

Contents

TEC MA-1350-1 Series Programming Manual Manual pdf 50 page image

- 48 -EO3-11084MA-1350-1 SERIESStore Message and Commercial Message ProgrammingCondition: Any time outside a saleProgramming Procedure:NOTES: 1. For each line, a maximum of 24 regular-sized characters or 12 double-sized charactersmay be entered. A combination of both types is also available.2. The line Nos. available are as follows.• Store Stamp Feature (Initial status)Line Nos. for Commercial Message (1 to 3)• Store Message Print FeatureLine Nos. for Store Message (1 to 4)Line Nos. for Commercial Message (5 to 7)3. If any incorrect characters have been programmed, depress the [C] key to clear all thecharacters on a line and then re-enter charactrs from the beginning, or end the line withan [ST] and re-program the entire line. The new data will be active.4. When all the lines have been programmed, do a check by issuing a receipt. Only the lineswith errors need to be re-programmed; other lines will not be affected.5. When blanks are programmed for the whole one line, it will cause one line space.6. As for Commercial Message, if blanks are programmed for all three lines, it will cause linefeed. However, if the message is programmed for one line, remaining two lines will resultin two lines space.As for the Store Message Print Feature, even if blanks are programmed for all four linesassigned to Store Message, it will not cause line feed. Those lines will result in four linesspace.Example) To program the following Store Message and Commercial Message(under the Store Message Print Feature):Character EntriesTo completethis linemax. 24 characters/line(See Character Entriesat the beginning of thischapter.)1 @/FORDeclaration of Program No. 1for Store Message and Com-mercial Message Programming. . .STLine No.1 to 7NOTE 2ST AT/TL(For sequentiallyprogramming lines,the line numberspecification can beskipped.)Repeat foranother line.T E C S T O R E1 3 4 3P H O N E :O p e nC l o s e d :P E A C H D R I V E8 7 - 6 4 3 7t o8 : 0 0 a m 7 : 0 0 p me v e r y W e d n e s d a yLine No. 1Line No. 2Line No. 3Line No. 4Line No. 5Line No. 6Line No.7