6 T2020 Operator's Manualdisplayed and the top row of LED's will be lit.2 Press the key for a second time to start the editing. All the available channelscan now be displayed by pressing the and keys. The "SCAN" indicatorwill indicate those channels that are included in the user programmable scan groupand a flashing "SCAN" indicator will indicate the home channel.3 Any channel can be added or deleted from the scan group by selecting the requiredchannel and then pressing the key.Note: A scan group must contain 2 to 16 channels.4 The home channel is defined by selecting a channel and then holding the keyfor longer than 1 second. The "SCAN" indicator will now be flashing.Note: You can only delete a normal channel from the scan group. If the homechannel is to be deleted from the scan group, you first have to define anotherchannel as home channel and then delete the original home channel.5 Once the group editing is complete, press the key to return to the functionmenu. An inactivity timer will also return the radio to the normal operating modeif no operator activity has been detected for the last 10 seconds.To Make a Call (Selcall Option Fitted)Selcall is enabled on a per channel basis. Hence if you try to make a call on a channel thatdoes not have Selcall enabled, an invalid key press tone will sound. Ensure you are awareof the channels which have Selcall enabled.1 If the radio is scanning, you may have to lift the microphone off its hook or selecta single channel in place of the scan group. Check that the radio is on the correctchannel and that the channel is clear before attempting to make the call.2 Your radio may have been preprogrammed with the ability to make a 'one touch' callto one other user; usually your base or despatcher - check with your Tait dealer. Tocall this user, press the key for about one second. You will notice that the"TX" indicator appears in the display briefly and your radio will sound a short beepas the call is transmitted.3 Your radio may be programmed with the ability to call other users with Selcall onyour channel. Press the key briefly to activate the Selcall mode. Enter the callcode for the other user on your keypad. Each digit will appear in the display as you