90 Operating in trunked modeChecking that your network isavailableCheck that the orange LED is glowing and the networkicon appears in the display. These are theindications that your radio has access to a trunkednetwork.If the network icon is flashing and No service appearson the display, your radio is attempting to access thetrunked network. If this icon remains flashing, yourradio may be out of the network coverage area.If Limited service appears on the display, one of thenetwork sites or the connection between the networksites has been interrupted. You can still make calls toradios covered by the same site but not to radios onother sites.Changing your networkYour radio may be programmed to operate in up tofour completely separate trunking networks, eitherDMR (digital), MPT (analog) or both (dual mode).You may wish to change networks because you areout of the network coverage area, or you need to haveaccess to another trunking network.To change your radio’s operating network, you maybe able to either use the Main menu or dial the newnetwork using the alphanumeric keys.Changing your radio’s workgroup may alsochange the network in which you are operating.See "Selecting a workgroup" on page 94.Using the Main menu1 Press Menu and select Change network.SelectBackMain menuChange networkChange mode
