Operating in trunked mode 93If your preset call number is the same as a call toanother radio, then you need to dial a leading 0.For example, dial 23# to call radio 23 and dial 023#for preset call number 23.2 Press Send or the # or PTT key.While the call is being setup, you can cancel thecall by pressing Cancel.About trunked zones andworkgroupsTrunked zones and workgroups are used to managethe calls on the trunked system. Zones, if used,typically define geographic areas (towns, suburbs orcounties), or branches of an organization.Workgroups span multiple zones, and typically definefunctions, work areas or job roles.When your radio belongs to a workgroup, it is said tobe ‘subscribed’, and you receive all calls directed tothat group of users. A group’s members are dynamic,in that a group only contains radios that are currentlyregistered on the system and subscribed to thesame group.Your radio may be programmed to use differentnames for a ‘zone’ and ‘workgroup’.For example, ‘district’ or ‘area’ may be used inplace of zone, and ‘role’ or ‘group’ may be usedin place of workgroup.23SendClear