90 Operating in conventional modeUsing the function key programmed for resetmonitor / call cleardown to end active callsThe function key programmed for reset monitor maybe programmed so that a short key press ends yourcurrent call, and a long key press ends all active callsin your group.Activating the repeater beforea callA repeater-access tone is sent to activate the repeaterbefore a call is made, so that the start of the call is notlost.To send a repeater-access tone, you may be able toeither use the PTT key, or use a programmedfunction key.Using the PTT key1 Press the PTT key and the repeater-access tonefor the current channel is sent.The call details appear in the display, the LEDglows red, and appears in the display. You mayalso hear signaling tones.2 Press and hold the PTT and proceed with your call.Using a function key1 Press the function key programmed for sending arepeater-access tone, and the repeater-accesstone for the current channel is sent.The call details appear in the display, the LEDglows red, and appears in the display. You mayalso hear signaling tones.2 Press and hold the PTT and proceed with your call.