Operating in conventional mode 95Suspending a channel from a voting groupYou may be able to use the function key programmedfor nuisance delete to temporarily delete one of thechannels from the voting group.When that voting group is next selected, or after theradio has been turned off and then on, the deletedchannel is again part of the voting group.Alternatively, the function key programmed for votingmay be programmed so that a short key press turnson voting, and a long key press activates nuisancedelete.■ Press and hold the function key programmed forvoting to remove the current channel from the vot-ing group.If the operation has been successful, the messageChannel deleted from group appears in thedisplay.Scanning a group of channelsThe scan function is used to monitor a programmedgroup of channels, looking for activity. While the radiois scanning for activity, the orange LED glows and thescanning icon appears in the display. Whenactivity is detected on a channel in the scan group, theradio stops on that channel. The orange LED beginsflashing, the radio unmutes and you can hear the call.Scanning resumes once the channel is no longerbusy.The section "Selecting a group" on page 80 explainshow to activate scanning.
