92 Operating in conventional modeReceiving a callWhen there is valid activity on your radio’s currentlyselected channel or group, the radio then unmutesand you can hear the call.If the incoming call contains special signaling thatmatches the signaling programmed for your radio, theLED flashes green and your radio may give a ringingtone.Receiving a text messageYour radio may be able to display received textmessages in conventional mode. If programmed, thequeuing icon (empty queue) or (message inqueue) is always shown in the default display while inconventional mode.Viewing a text messageWhen a text message is received, the radio soundstwo short high-pitched beeps. If the radio is currentlyshowing the default display, the message appearsimmediately.To view a message that does not appear immediately:1 Navigate to the default display.2 Press Queue.To delete the message, press Delete. Themessage Queue empty appears in the display.If you want to leave the message in the queue,press Back.The conventional call queue only retains onemessage. If a new message is received whilethere is an old message left in the queue, theold message will be replaced.