34 Before using your radioRemoving the antennaWarning Do not change the antenna in a hazardouslocation. An explosion could cause serious injury ordeath.Use a firm grip and turn the antenna counterclockwisehalf a turn. Use a lighter grip to fully unscrew theantenna, and carefully remove it.Attaching a belt clipTo attach a belt clip to the radio:1 Slide the belt clip into the two grooves at the top ofthe battery.2 Press down on the belt clip until it snaps into place.Removing a belt clipThe belt clip has been designed to prevent accidentalremoval, but you can take it off, if required.To remove a belt clip from a battery:1 Insert a flat screwdriver blade or similar flat objectunder the lip of the release lock (that is, between itand the metal slider).2 Lift the release lock up (away from the metal slider)and hold it in position.3 Slide the belt clip out.