Operating in conventional mode 69Receiving callsWhen a call is received with valid signaling, the radiounmutes and you can hear the call.Identifying the talking party or callerYour radio may be programmed to display the nameor radio ID of the talking party or caller.For digital calls, if the name ofthe talking party is in the calllist, the radio will display thename of the talking party.If this name is not in the calllist, only the radio ID is shown.Digital talkgroup calls will firstdisplay the name of thetalkgroup. While a party istalking, the radio will alsodisplay the name or radio IDof the talking party.Analog calls may beprogrammed to broadcastthe caller’s radio ID with thecall.Turning digital caller ID on and offYour radio may be programmed to allow you to turnthe talking party ID for digital calls on and off.1 Press Menu and select Radio settings > Displaysettings > Talk party ID.2 Scroll to either On (or Off) and press Select.(The current setting is highlighted.)The message Talking party ID activated(or deactivated) appears in the display.Call receivedCar 2 MenuCar 2Talkgroup01MenuIncoming call12345 Answer