3–68 Operator ManualVertical ScaleThis parameter determines whether vertical block characters will be scaled to thesame dimensions as horizontal block characters. Style 1 is the default.Style 1: Adds intercharacter gap after the character has been rotated.Style 2: Does not add gapOff: Vertical block characters will be compressed vertically due to thehigher vertical density (72 DPI vs. 60 DPI).ZeroAs an aid in distinguishing zeros from the uppercase letter O you can choose tohave your zeros slashed (Ø). Slashed is the default. Zero is used by code V andPGL.SFCCThis parameter allows you to change the Special Function Command Character.The Default for this parameter is the ASCII tilde ( ~, Decimal 126, HEX 7E )character. Options are 1–255 (Decimal designators for ASCII characters)Code V LanguageThis parameter allows you to select the language character set that will be usedfor text output in Code V Graphics Mode. The default is US. The availableselections are:US UK Swedish/FinishNorwegian/Dan Japanese GermanFrench Italian SpanishPGL LanguageThis parameter allows you to select the language character set that will be usedfor text output in Printronix Graphics Mode. The default is ASCII. The availableoptions are:ASCII German SwedishDanish Norwegian FinnishEnglish Dutch FrenchSpanish Italian TurkishFree FormatThis turns on Free Format Mode in Code V graphics whenever a ^PY is encoun-tered. Free Format will remain active until a ^PN or ^O (Free Format Mode Off)command is received. The default is Off.Automatic PYIf Automatic PY is Enabled, the printer is automatically in Code V graphics mode,and a ^PY command is not needed in the file being sent to the printer to beginCode V graphics. The default is Disabled.Config Menu⇒ Graphics
