Jul 071-14 45 PPM Laser Printer User GuideInstallation ProcedureConnecting the Power Cord1. Connect the power cord to the power cord connector at the back of the printer.2. Make sure that the power switch has been firmly pushed to the <{> (Off) position and theninsert the other end of the power cord to the power outlet.WARNING! Two power specifications are listed below. The specifications that apply to yourprinter depend on its configuration. Connect the power plug only to a properly rated power out-let. Otherwise, it can cause fire or electric shocks. If in doubt, contact Technical Support.110V Model: 110–127VAC 50–60Hz, 12.2A230V Model: 220–240VAC 50–60Hz, 5.8ATo prevent fire or electric shock, follow the instructions below based on your machine configura-tion.
