Jul 0745 PPM Laser Printer User Guide 2-23Interface MenuInterface MenuThe Interface Menu provides access to the printer interface settings. Use the following procedureto enter the interface menu:1. Press the MENU button on the control panel.2. Press the NEXT button until the text Interface Menu is shown on the second line of thedisplay.3. Press the SELECT button to enter the interface menu.4. Press the NEXT button to move through the submenus: Port, Parallel Setup, Network 1Setup, Spooling, and USB Setup.Use the procedures in the following table to access and change the printer interface settings:Submenus Default Setting Available Settings Procedure for Changing SettingPortThis submenu allows you toenable the type of interface.Parallel:OnSerial: OnNetwork Card 1:OnUSB:OnParallel:On, OffSerial: On, OffNetwork Card 1:On, OffUSB:On, Off1. Press NEXT or PREVIOUSto toggle betweenPARALLEL, NETWORKCARD 1 and USB.2. Press SELECT to save thissetting.Parallel SetupThis submenu allows you toset up the parallel interface.Interpreter:Auto SwitchFormat:RawMode:BidirectionalDelay Out Close:*OffBinary PS:OffInterpreter:Auto SwitchPCLPostScript 3Format:RawNormalBinaryMode:BidirectionalStandardDelay Out Close:OffOnBinary PS:OffOn1. Press NEXT or PREVIOUSto scroll through theINTERPRETER, FORMAT,MODE, DELAY OUTCLOSE, and BINARY PSsubmenus.2. Press SELECT to choose asubmenu.3. Press NEXT or PREVIOUSto scroll through the settings.4. Press SELECT to choose andsave a setting.
