3–46 Operator ManualOperator Menu⇒ FontOperator Menu1. Toggle the Online key once or twice to clear the display and put theprinter Offline. Offline should be displayed and the green light should beoff.2. Press the Menu key.3. Use the Up or Down arrow keys until you see Operator Menu on thedisplay.4. Press Enter.5. Use one of the arrow keys until the desired category appears; press theMenu key if you need to back up a level.Font CategoryThis category contains parameters thatcontrol how print looks on a page and thedisplay language. Use the Arrow andEnter keys to select Menu => OperatorMenu => Font to get here. They are asfollows:Ser/Par LanguageThis parameter allows you to select the language used by emulations attached tothe Parallel, Serial, and LAN ports (except for LAN-IPDS). The language selec-tion defines the character substitutions in Hex locations 23, 24, 40, 5B, 5C, 5D, 5E,60, 7B, 7C, 7D, and 7E. The default is US.The details of the character substitutions can be found in the Line Printer Appli-cations Manual. The possible options are:US German Norwegian/DanFrench UK SpanishSwedish/Finish Italian JapanesePortuguese Canadian HungarianChinese FrenchT6 SwedishT6Italian T6 Canadian Alt Swedish BasicFrench Withdrawn Nor/DanT6 UK LGDutch LG Finnish LG Swiss LGJIS Roman LG Nor/Dan LG Swedish LGISO Nor/Dan LG Portuguese LG VT 100Turkish LG Cro-ASCII Nor/Dan EpsonFrench Epson UK Epson Spanish EpsonItalian Epson Norwegian Epson Danish EpsonSpanish 2 Epson Lat Amer Epson IRV
