How to use "RTR-61 for Windows" 103About File Names and Locations for Downloaded DataThere are two ways to specify a file name and destination folder inwhich to save the downloaded data.Click to make temporary settings for the file name and / ordestination folder.Click on the file name and/or the destination folder to make any temporarychanges to the name or folder. By closing the [Download Data] Window, thesettings made here will be used.Select the Remote Unit you wish to make settings for. Then place the cursor at the filename or destination folder and click on it to make changes.Make settings from [Operational Settings]Prefix and destination folder settings can be made from the [OperationalSettings] Menu – [Recorded Data File Settings]. (See page 100 for details)Storage Folder:The data will be saved into the folder on display.A Data File Name will be automatically assigned with the following format.Data Downloaded via Wireless Communication:[Group Name_Remote Unit Name_D/M/Y/Hr/Min/Sec.ext]- Changes can be made to the prefix ([Group Name_Remote Unit Name]) in theOperational Settings Window under "Recorded Data File Settings" - "Prefix".Data Downloaded via Optical Communication: [D/M/Y/Hr/Min/Sec.ext]About Downloaded Data FilesWhen downloading recorded data, data file ".puw" and text file ".txt"will be simultaneously created and saved into the same destinationfolder.- For details about the destinationfolder, see page 128 for details.