20 Getting Ready - RTR-5WChecking your Operating EnvironmentTo properly use the logger, the following operational environment isnecessary.PC Operating EnvironmentOS Microsoft Windows 7 32/64bit EnglishMicrosoft Windows Vista 32bit EnglishMicrosoft Windows XP 32bit(SP2 or above) English* For installation, it is necessary to have Administrator (ComputerAdministrator) rights.PC/CPU A Stable Windows Operating EnvironmentLAN TCP/IP Communication PossibleMemory Enough memory to stably operate Windows®Hard Disk More than 20 MB of free space (Data will need more space)Monitor SVGA (higher than 800 x 600 recommended) more than 256 colorsLAN 100BASE-TX or 10BASE-TTwisted pair cable conforming to Category 5 (STP/UTP)[Using a LAN]Connect the provided LAN cable to the HUB that is connected to your computer.[Connecting Directly to a PC]Connect the RTR-5W to your computer with a LAN cross cable.* LAN cross (reverse) cables are not included with the product. Please purchaseseparately.[Using a Wireless LAN]Please use a Wireless LAN card and a Wireless LAN access point (Combined WirelessLAN and Hub OK).* For information and updates concerning which wireless LAN cards can be used,please contact your local T&D dealer or representative.[Using the Internet]In order to connect to the Internet, you must first make arrangements with a provider for aline.It may also be necessary to get an IP address or domain and make domain name serverand other settings.For more details about various settings, it is best, if present, to contact the networkadministrator. To get more details about your Internet connection and setup, pleasecontact your provider.
