34 Getting ReadyInstalling the USB Device DriverBefore using the RTR-50, it is necessary to install the USB devicedriver. After installing the USB device driver, your computer will beable to detect and recognize any RTR-50 that has been connectedwith a USB cable.1. Connect the supplied USB cable to a USB port on yourcomputer.USB mini-BPlugTo PC (USB Port )supplied USB CableTo RTR-50USB -APlugUSB Port MarkThe USB communication cable is a USB-A plug ⇔ USB mini-B plug.Connect to a place with a mark as such.2. Insert the attached CD-ROM in the CD-ROM drive. If theInstallation Window opens, close it.3. Connect an RTR-50 to the USB cable already connected to yourcomputer.4. Please install the USB Device Driver. The installation procedurediffers slightly depending upon which OS is being used; pleaserefer to the procedure for the OS being used.Vista / 7..................................................................p.35XP ..........................................................................p.36 - p.39If USB Device Driver Installation Fails ...................p.40
