How to use "RTR-61 for Windows" 1094. Click the [Send Command] button to send the message to theRemote Unit and wait for the response from the Remote Unit.- If the Window is closed without clicking the [Send Command] button, theMeasurement Command will not be sent.- If the Recording Mode in the Remote Unit has not been set to "Remote" suchRemote Measurement Commands cannot be made.- If no Item Table has been registered into the Remote Unit, Remote MeasurementCommands cannot be carried out.- Depending on the setting, the Unit of Temperature for display will be shiftedbetween C and F.- Remote Measurement Commands cannot be carried out on a multiple number ofRemote Units.Messages shown during communication of aMeasurement CommandBy clicking [Send Command], a message will appear that acommunication is currently in progress.[Communicating with XX.]When an RTR-61 unit receives a Measurement Command, the messagedisplayed during communication will change. ⇔[Waiting for RemoteMeasurement Results.]The results of the remote measurement will be waited for during thetime period set in [Measurement Command Timeout].⇔
