Others 133Q&AQ&A about RTR-5WQ.1 RTR-5W units use an AC adaptor, what happens when there is powershortage?A During a power shortage the Web Server will not function andcommunication via LAN cannot occur.Q.2 Can I connect directly to my computer with the LAN cable that comeswith the logger ?A To connect a RTR-5W logger directly to your computer, you must use across LAN cable.The LAN cable supplied is a straight LAN cable and cannot be used toconnect directly to your computer.Please purchase a cross LAN cable at your local computer supply store.Q.3 Is it possible to connect the RTR-5W to the network by using the LANcable that connects the computer to the LAN network?A Inserting the wireless LAN cable that connects the computer to the networkinto the RTR-5W will physically connect the RTR-5W to the network, butwithout making the necessary settings such as IP address, the RTR-5Wcannot be active in the network and hence is not really connected.After having inserted the LAN cable, make sure to go to [Network SettingsUtility] to make the necessary IP address and subnet mask settings.Q.4 Is it possible to connect to a wireless LAN by removing the wirelessLAN card from my computer and using it?A It is necessary to make Wireless LAN settings.In [Network Settings Utility], under [Detailed Network Settings] makechanges to the [Wireless LAN Settings]. After that, turn OFF the RTR-5Wpower, then insert the card and turn the power back ON.Q.5 I want to use a wireless LAN, which products should I use ?A Please use only those CF type Wireless LAN cards that have been proven tobe compatible and are suggested for use.Q.6 Which has priority, a wireless LAN or a wired LAN ?A If the Wireless LAN is connected properly and all settings are correct, theWireless LAN will have priority.⇔* For information and updates concerning which wireless LAN cards can beused, please contact your local T&D dealer or representative.
