2 – Mixer26 TASCAM 2488 User’s GuideEQLike the ordinary channels, the stereo bus has three-band equalization, with sweepable center frequen-cies, and variable Q for the midrange.To access this,1 Press the STEREO key.2 Press the EQ key:3 Use the cursor keys and wheel to select andadjust the EQ parameters for the stereo bus.DynamicsThe stereo bus has a stereo dynamics processor(compressor or expander) available.1 Press and hold the SHIFT key.2 Press the STEREO key.3 Use the cursor keys and wheel to select andadjust the parameters for the effect. Note thatthe last parameter is an on/off switch. Whenset to OFF, the dynamics processor is bypassed.Dynamics library From the screen above, press-ing ENTER brings up the stereo dynamics libraryscreen.Use the left and right keys to select the PRESET orUSER libraries, or to SAVE the current setting.Use the wheel to select library entries and pressENTER to load the entry.If you save a setting, you can add a title to the currentstereo dynamics settings and press ENTER to save itas a user library effect.
