Tascam 2488 User Manual

Also see for Portastudio 2488: Specifications Reference manual Application guide Quick start guide

Contents

Tascam 2488 User Manual Manual pdf 52 page image

4 – Recorder52 TASCAM 2488 User’s GuideMOVE -> PASTEThis function takes the section of a track or tracksmarked by the IN and OUT points, and moves it tothe chosen track or tracks, starting at the TO point.After the operation, the selected section of the sourcebetween the IN and OUT points is replaced bysilence.This operation overwrites anything which is alreadyrecorded at the destination. The destination is there-fore the same length as it was before the operation.You can change the following values:Src. Trk This sets the source track or tracks fromwhich the section is taken. Choose 1 through 24 toselect an individual track. Choose 1/2, 3/4, 5/6, etc. toselect a pair of tracks. Choose 1-24 to select all tracks.Dst. Trk This sets the destination track or tracks towhich the selected section is moved. What you canselect here depends on what you have selected for thesource track. If you have selected a single track, youcan select tracks 1 through 24 here. If you haveselected a pair of tracks (for instance, 1/2), you canonly select track pairs here. If you have selected alltracks (1-24), then 1-24 is the only option available toyou here.Press YES to perform the operation or NO to leavethis screen.NOTEYou can also use the SHIFT + INSERT key combinationto enter this function easily.MOVE -> INSERTThis function takes the section of a track or tracksmarked by the IN and OUT points, and moves it tothe chosen track or tracks, inserting it as new mate-rial, starting at the TO point.After the operation, the selected section of the sourcebetween the IN and OUT points is replaced bysilence.The insert operation adds the selected section as newmaterial to the destination. Nothing is overwritten onthe destination, as any material following the TOpoint is moved to the end of the newly-insertedsection. The destination is therefore longer than itwas before the operation.You can change the following values:Src. Trk This sets the source track or tracks fromwhich the section is taken. Choose 1 through 24 toselect an individual track. Choose 1/2, 3/4, 5/6, etc. toselect a pair of tracks. Choose 1-24 to select all tracks.Dst. Trk This sets the destination track or tracksinto which the selected section is inserted. What youcan select here depends on what you have selectedfor the source track. If you have selected a singletrack, you can select tracks 1 through 24 here. If youhave selected a pair of tracks (for instance, 1/2), youcan only select track pairs here. If you have selectedall tracks (1-24), then this is the only option availableto you here.Press YES to perform the operation or NO to leavethis screen.OUTIN TOOUTIN TOOUTIN TOOUTIN TO