Tascam BB-1000CD Owner's Manual

Also see for BB-1000CD: Owner's manual Technical information Release notes

Contents

24 TASCAM BB-1000CD3–Part Names and Functionsy OVERDUB keyPress this key when recording a mixed sound of CD/SDplayback and other input signals (overdubbing).The unit becomes on standby for overdubbing bypressing the key and the key lights during on standby.u REC/READY [º] keyPress this key to make the unit on standby forrecording. The key is flashing while on standby. Thekey lights during recording.During recording, press this key to make the unit onstandby for recording.i F1 keyThis key works variously depending on the statusof the unit; confirming of the selection, returning tothe previous step. etc. The function of the F1 key isindicated on left bottom of the display.o HOME keyPress this key to return to the Home screen whiledisplaying another screen.p MENU keyWhen the Home screen is displayed, press this key toopen the menu list (MENU screen).When a setting screen is displayed, press this key toreturn to the MENU screen.a F2 KeyThis key works variously depending on the statusof the unit; confirming of the selection, returning tothe previous step. etc. The function of the F2 key isindicated on right bottom of the display.s CURSOR [§/¶/˙/¥] keyPress this key to move the cursor (highlighted area) ona setting screen.d STOP keyPress this key to stop playback. The track returns to itsbeginning.f Â/Ô keyPress this key within 1 seconds from the beginning ofa track to skip to the beginning of the previous track.Pressing it at more than 1 seconds after the beginningof a track skips to the beginning of the current track.Press and hold this key to fast-reverse the tracks.Pressing this key during loop playback slides the endpoint of the loop back to its start point, keeping thetime length of the loop.g ¯/ keyPress this key to skip to the next track.Press and hold this key to fast-forward the tracks.Pressing this key during loop playback slides the startpoint of the loop forward to its end point, keeping thetime length of the loop.h PLAY/READY [Á/π] keyWhen the Home screen is displayed and playback isstopped, press this key to start playback.During playback, press this key to pause it.j FLASH BACK keyPress this key to skip a few seconds back the trackduring playback (or pause). You can adjust the skipback time at the SET UP screen (∑ page 36 “Skipping atrack a little backward (FLASH BACK)”).k TUNER keyPress this key to open the TUNER screen. You can usethe unit as a chromatic tuner for instrument (∑ page 41“Chromatic tuner mode”).When the TUNER screen is displayed, press this key toreturn to the Home screen.l LOOP keyUse this key to activate/deactivate the loop playbackwhen the start point and end point of playback has beenset (∑ page 37 "Loop playback (I–O LOOP)”).Use this key to activate/deactivate repeat playbackwhen the points are not set (∑ page 37 “Repeatplayback” ).Press IN/OUT/MARK key while pressing andholding this key to clear the start/end/marker point,respectively.; IN keyUse this key to set the start point of the loop playback.Press this key while pressing and holding the LOOP keyto clear the start point (∑ page 37 "Loop playback (I–OLOOP)”).z OUT keyUse this key to set the end point of the loop playback.Press this key while pressing and holding the LOOP keyto clear the end point (∑ page 37 "Loop playback (I–OLOOP)”).x MARK keyUse this key to set the marker point where playbackstarts. Press this key while pressing and holding theLOOP key to clear the marker point on the Homescreen. (∑ page 36 “Playback from marked point”).