Tascam BB-1000CD Owner's Manual

Also see for BB-1000CD: Owner's manual Technical information Release notes

Contents

34 TASCAM BB-1000CDOperation exampleSee an operation example below: changing “FLASH BACKtime” on the SETUP menu.1. When the Home screen is displayed, press the MENUkey to open the MENU screen.NOTEWhen the ¶ icon appears in the lower right part of the screen, asshown in the preceding image, there is additional information forthe current screen below what is shown on the display.When the § icon appears, there is additional information for thecurrent screen above what is shown on the display.2. Press the CURSOR [§/¶] key to select SET UP (high-lighted in inverse), and press the ENTER key to openthe SETUP screen.5–Screen OverviewSetting screen listScreen Overview Access methodPART CANCEL Decreasing the sound of vocal and guitar. MENU key MENU screenREC SETTING Adjusting recording settings such as auto-recording and file format. MENU key MENU screenSET UP Adjusting environmental settings MENU key MENU screenDATE/TIME Adjusting the built-in clock MENU key MENUscreen SET UP screenEDIT Editing files: dividing, moving, and deleting MENU key MENU screenCOPY Copying files between a disc and an SD card MENU key MENU screenMEDIA Finalizing and unfinalizing a disc, deleting tracks, browsing files on anSD card, formatting an SD cardMENU key MENU screenBROWSE Browsing audio files and folders, playing/deleting files, making/select-ing a folderMENU key MENUscreen MEDIA screenINPUT Selecting an input and adjusting the input settings INPUT keyBALANCE Adjusting left and right balance of input signals and setting the volumeof the playback signalBALANCE keyMETRONOME Set and operate metronome functions METRONOME keyTUNER Access tuner and oscillator functions TUNER key3. Use the CURSOR [§/¶] key to select FLASH BACKand show the current setting value (the factorysetting is “2sec”) highlighted in inverse.4. Turn the DATA wheel to select the desired setting. Thesetting is changed immediately, so there is no need topress the ENTER key again to confirm it.NOTEWhen the § icon appears to the right of a setting value, you canchange that value by turning it to the right. When the ¶ iconappears to the right of a setting value, you can change that valueby turning it to the left.