Tascam BB-1000CD Owner's Manual

Also see for BB-1000CD: Owner's manual Technical information Release notes

Contents

TASCAM BB-1000CD 33Record screenThis screen opens when you press the REC/READY [º] keyto start recording standby mode and stays open when youpress the REC/READY [º] key again to start recording.1 Recorder operationº Recordingπ Recording pausedª Recording stopped2 Record level meterThe input signal level of the selected input appears asseparate L and R channels. The right end of the meterlights up for a while when the signal level is too high.3 File numberThe number of the file currently recorded is indicated.4 Elapsed recording timeThe elapsed recording time appears in hours: minutes:seconds.5 Remaining recording timeThe remaining recording time appears in hours:minutes: seconds.6 Current function of the F1 keyThis shows the function currently assigned to the F1key. On the Recording screen, pressing it divides therecording file.Setting screensUse this unit’s various setting screens to make various set-tings, conduct operations and show information.NOTEAlthough the various setting screens are also used to execute func-tions and display information, for example, in addition to makingsettings, we call them “setting screens” in this manual.Setting screen structureMost of the setting screens are accessed by first press-ing the MENU button to open the MENU screen, but somescreens can also be accessed directly using dedicated keys.See also the setting screen list on the next page.Operation basicsUse the MENU, CURSOR [§/¶/˙/¥], ENTER, F1, F2 andHOME keys and the DATA wheel to conduct most opera-tions on the various setting screens.The keys have the following functions.MENU key:Press this key to open the MENU screen (except when theMENU screen is already open or the Record screen is open).When the MENU screen is open, press this key to return tothe Home screen. This key is inoperative when the Recordscreen is open.CURSOR [§/¶] key:Use this key to select an item.CURSOR [˙] key:When a setting screen is open, moves the cursor (part high-lighted in inverse) to the left within the screen.CURSOR [¥] key:When a setting screen is open, moves the cursor (part high-lighted in inverse) to the right within the screen. In manycases, the ENTER key can also be used this way.ENTER key:Use this key to confirm the selection.F1/F2 key:Use these keys to switch a setting screen to another and toselect YES/NO or BACK/NEXT for answering a confirma-tion message.HOME key:When a setting screen is open, press to return to the Homescreen.DATA Wheel:Use this to change the value of the selected item.5–Screen Overview