Tascam CD-A550 Owner's Manual

Also see for CD-A750: Specification

Contents

34 TASCAM CD-A550/CD-A7505 – Playing Back CDsThe call point is erased after any of the followingoperations.The power is turned OFF•The disc tray is opened•The playback mode is changed•The folder playback function ON/OFF setting is• changedThe folder is changed•If you press the CALL key when no call point has•been set, “No Call Pt!” appears on the main display.The call function cannot be used during random•playback mode.Resume playbackTurn the resume playback function ON to allow playbackto restart from the position where playback was last stopped(resume point).When the resume playback function is ON, RESUME appearson the display.1 When in standard display mode, press the MENUkey on the main unit or the remote control to entermenu mode.2 Use the –/+ keys on the main unit or the remote con-trol to show “RESUME?” on the main display, andpress the ENTER key on the main unit or the remotecontrol.3 Use the –/+ keys on the main unit or the remote con-trol to select “ON” or “OFF” (default value).4 Press the ENTER key to return to the standard dis-play.The resume point ON/OFF setting is retained even if•the power is turned OFF.The resume point is erased after any of the following•operations.The disc tray is opened–The folder playback function ON/OFF setting is–changedThe folder is changed–The playback mode is changed–EOM functionTurn the EOM (End Of Message) function ON to have theunit start blinking the playback time display when the audioCD reaches the remaining playback time set in advance. Inaddition, the CD-A750 model can send an EOM tally signalwith this information from its CONTROL I/O PARALLELjack, and this tally signal can be used to light an externallamp, for example. Use the menu to set the EOM function.(See “Using the menu” on page 17 for details about how touse the menu.)1 When in standard display mode, press the MENUkey on the main unit or the remote control to entermenu mode.2 Use the –/+ keys on the main unit or the remote con-trol to show “EOM DISP?” on the main display,and press the ENTER key.3 Use the –/+ keys to choose one of the following set-tings.Options: OFF (default value), 5sec, 10sec, 15sec, 20sec,25sec, 30sec, 35secAll the settings except for “OFF” turn the EOM functionON and indicate the number of seconds before the endof the track when the unit’s playback time starts to blinkon the display.4 Press the ENTER key to return to the standard dis-play.This setting is retained even if the power is turned OFF.How to use the tally signal (CD-A750 only)1 Following the procedures above, use the menu toset the EOM DISPLAY item to any setting besides“OFF.”2 Connect this unit to the device that is to receive theEOM tally signal using the CONTROL I/O PARALLELjack. See “Using the parallel connector” on page 45for information about the PARALLEL jack pin alloca-tion.3 Turn the power of this unit and the receiving deviceON.4 Start playback of the CD in this unit. During play-back, when the set track remaining time is reachedthe EOM tally signal is output from the CONTROL I/O PARALLEL jack.