Tascam CD-RW901 Owner's Manual

Also see for CD-RW901: Specifications Service manual Consultant’s Specification Owner's manual Specifications

TASCAM CD-RW901 14 − Playback operationsThe CD-RW901 can be used to play back CDs (includ-ing CD-R and CD-RW discs that have been recordedand finalized on other types of recorder), as well asCD-R discs and CD-RW discs that have been recordedon the unit.Audio files in MP3 format on CD-ROM, CD-R andCD-RW are also playable on the unit.Simple playback operations1. Press the POWER switch to turn on the unit.2. Press the OPEN/CLOSE key to open the disc tray.The display shows Open. Insert a disc in the traywith the label side up.3. Press the OPEN/CLOSE key to close the tray. Thedisplay shows Close when a disc is loaded intothe unit, then TOC Reading will appear, with theperiod flashing.When the TOC has been read, the display shows thenumber of tracks and total running time of the disc.Disc typeTotal running timeTotal number of tracksThe CD-RW901 also shows one of the following:TOC A disc finalizedMP3 A disc contains MP3 files4. Press the PLAY key to start playback.Adjust the connected monitor system, or thelevel control for the PHONES on the unit to setthe listening level you desire.WARNINGIf you are monitoring using headphones, first adjustthe level control to low on the unit, then connectto the PHONES jack before playing back. This willprevent any possible damage to your hearing.5. To stop playback, press the STOP key.To temporarily stop playback and enter play-back standby mode, press the READY key. Toresume playback, press the PLAY key again.NOTEThe explanation in this manual will assume the useris starting from the normal Continuous mode.Track selectionSkipping track numbers backward or forward.1. Select desired tracks for playback with theMULTI JOG dial on the front panel. Turningclockwise skips the track number backward andcounterclockwise skips forward.Or, press the SKIP key on the remote control.Pressing Â key skips the track number back-ward and ¯ key skips forward.2. Press the PLAY key to start playback.Or, press the READY key to cue the track andenter playback standby mode after moving tothe head of the selected track. To start playback,press the PLAY key.Using the skip functionDiscs for playbackThe CD discs in the CD-RW901 can play back thetypes of discs listed below.Commercial pre-recorded CDs recorded in CD-DAformat.CD-R and CD-RW discs that have been recorded inCD-DA format and finalized properly.••MP3 files recorded in ISO9660 level 1 and level2 format on CD-R and CD-RW discs, and properlyfinalized. MP3 files that are recorded to a disc withJoliet format extensions are also playable.•