0 TASCAM CD-RW901Rec mute functionThe Rec mute function allows instant cut-off of theinput signal, and records four seconds of silence on thedisc.While recording is in progress, press the REC MUTEkey on the remote control.The display shows the Rec Mute flashing, the meters stopdisplaying the current level and the monitored sound iscut.After about four seconds, the unit enters record readymode.NOTEThis function is only available from the remote con-trol unit.Restricting the number of tracksWhen making a recording, it is possible to restrict thenumber of tracks that nay be recorded at one time.At any time within record or record ready mode, turnthe MULTI JOG dial to display the track numbers youwant to record.The maximum number that can be entered is 99 tracks.Copy-protectionThe CD-RW901 allows copy-protection to be appliedto the discs produced. Naturally, the copy-protectionapplies only to digital-to-digital copies.There are three settings:FREE (may be freely copied), where no copy-pro-tection is applied to the recorded disc.1GEN (single-generation copying), where one digitalcopy (“child”) can be made from the recorded disc,but no digital copies (“grandchildren”) can be madefrom the child.PROH (copy prohibited) which prevents any digitalcopies being made from the recorded disc.Origin (SCMS:Serial Copy Management system)which applies CCI (Copy Control Information) to therecorded disc.Use the COPY ID option in the REC sub-menu to setthe function on (see “Operation basics” on page 16).Turn the MULTI JOG dial to select the desired settings.••••NOTECopy-protection applies on a “per-track”, not a per-disc basis. This means that you can apply differentcopy-protection levels to different tracks (but youcan’t apply different copy-protection levels to dif-ferent parts of the same track). If copy-protection isimportant to your work, you may want to check thissetting every time you make a recording, to ensurethat you have the protection level that you want.5 − Recording