TASCAM CD-RW901 9Automatic track division with trim functionWhen Auto Track is set to either Level or DD mode,it is possible to trim the automatic track division pointusing A_TRK TRIM option in the REC sub-menu (see“Operation basics” on page 16). This function allowsyou to slip the start time of the track increment forwardsor backwards.NOTEWhen Auto Track mode is set to Time, the value setin Auto Track Trim is ignored.The available trim value is from -125 through +125frames.Use the MULTI JOG dial or MENU (+/-) key on theremote control to adjust the trim value.Automatically Incrementing index numbersWhen recording with auto track function, when INDEXINC is set to on (see “Operation basics” on page 16), theunit overrides the setting of the automatic track division,and instead of incrementing track numbers, it incre-ments the index numbers within a track.Use the MULTI JOG dial or MENU (+/-) key on theremote control to switch INDEX INC on or off.Index XX where XX is index numbers will appear onthe display.NOTEThe maximum index number within a track is 99.When the unit reaches 99, it will increment the tracknumber and start assigning index numbers count-ing from one.Manually divide trackWhile recording is taking place, press the RECORDkey. The current track number is incremented by one.For details of automatic track division while recording,see “Automatic track division” on page 28.NOTEAccording to the “Red Book” (the specification foraudio CDs), a track cannot be less than four sec-onds in length, and there can be a maximum of 99tracks on an audio CD. Bear these limitations inmind when adding track divisions.This operation can not be applied while recordingtrack 99.Time (Time track increment)The track will be incremented when the timeset prior to recording using the menu item“A_TRK_TIME?” has passed (see “Operationbasics” on page 16). The time can be set between oneminute and ten minutes in one minute increments.• The A.TRACK indicator blinks during recording or whenin record ready mode.This function can be turned on by pressing theAUTO TRACK key on the remote control.Manually incrementing index numbersThis function allows you to manually assign index num-bers.1. Select the INDEX option in the SYSTEM sub-menu. Index> XXX will appear on the display.Use the MULTI JOG dial or MENU (+/-) key on theremote control to set the function on or off.2. Start recording.3. Press the CALL key at the point you want toassign an index number. Index XX where XXshows the number, will be displayed.NOTEThe maximum index number within a track is 99.When the unit reaches 99, it will increment the tracknumber and start assigning index numbers count-ing from one.5 − Recording